Screamer Killer "repose", Old One Eye, other "kitbash"
Jul 21, 2023 20:09:49 GMT
hivefleetkerrigan and coelo like this
Post by icetyrant on Jul 21, 2023 20:09:49 GMT
Sorry for the order of the images, my fingers, bad lighting & background... 
Image link for more pictures
No greenstuff used, just plastic glue and some shaved spare sprue to fill gaps. And hot glue + airsoft pellets on biovores.
Repose Screamer Killer = chopping off the things under the right foot, cutting off some of the collar to change the angle on the head.
For the neck I used a warrior torso, venom cannon feeder hand tube, lots of plastic glue and some spare plating. I’m thinking the neck isn’t that visible so it’ll pass.
For OOE I chopped off the talons on all 4 arms and added claws and bigger talons instead with plastic glue. I cut off the old head behind the jaw and glued it on instead of the screamer killer face. I tilted the model a bit forward to give the impression of another pose.
Other bashing:
Venomthropes and Zoanthropes. Used the proper heads, back torso and arms. Used the rattle tail from Trygon kit as a ”tail”, random claws as 3rd pair of arms (claws from venom cannon), Venom cannons from the Tyrannocyte big exhausts and barbed strangles for the smaller ones. Scooped out some of it to add depth to them. Front body for Zoans were Carnifex Enhanced senses with shaved sprue goop to fill it out. Venomthrope got a Toxicrene braincover plate.
Mucolid Spores got chopped up toxicrene lashes for tentacles.
Biovores I made a while back from basically spare parts. Carnifex backplate and claw arms with cut off claws as upper arms. One of the claw bits was used as a small tail and I used Ravener torsos + Carnifex Thresher Scythe to meld them together. Stealer lower arms and warrior scything talons as legs (cut off the talons almost completely so it kind of looked like feet claws instead, and like they crawl forward when then have to move. Carnifex Strangle Thorn Cannons as the launcher. Genestealer heads with the genestealer extra carapace bits cut in two and used for head plates. Filled up the gap between the body and cannon glued to the carnifex plate with soft airgun pellets and then used hot glue (I hadn’t used the glue+sprue at that point) to fill the gaps.
Imgur pictures for more
Image link for more pictures
No greenstuff used, just plastic glue and some shaved spare sprue to fill gaps. And hot glue + airsoft pellets on biovores.
Repose Screamer Killer = chopping off the things under the right foot, cutting off some of the collar to change the angle on the head.
For the neck I used a warrior torso, venom cannon feeder hand tube, lots of plastic glue and some spare plating. I’m thinking the neck isn’t that visible so it’ll pass.
For OOE I chopped off the talons on all 4 arms and added claws and bigger talons instead with plastic glue. I cut off the old head behind the jaw and glued it on instead of the screamer killer face. I tilted the model a bit forward to give the impression of another pose.
Other bashing:
Venomthropes and Zoanthropes. Used the proper heads, back torso and arms. Used the rattle tail from Trygon kit as a ”tail”, random claws as 3rd pair of arms (claws from venom cannon), Venom cannons from the Tyrannocyte big exhausts and barbed strangles for the smaller ones. Scooped out some of it to add depth to them. Front body for Zoans were Carnifex Enhanced senses with shaved sprue goop to fill it out. Venomthrope got a Toxicrene braincover plate.
Mucolid Spores got chopped up toxicrene lashes for tentacles.
Biovores I made a while back from basically spare parts. Carnifex backplate and claw arms with cut off claws as upper arms. One of the claw bits was used as a small tail and I used Ravener torsos + Carnifex Thresher Scythe to meld them together. Stealer lower arms and warrior scything talons as legs (cut off the talons almost completely so it kind of looked like feet claws instead, and like they crawl forward when then have to move. Carnifex Strangle Thorn Cannons as the launcher. Genestealer heads with the genestealer extra carapace bits cut in two and used for head plates. Filled up the gap between the body and cannon glued to the carnifex plate with soft airgun pellets and then used hot glue (I hadn’t used the glue+sprue at that point) to fill the gaps.
Imgur pictures for more
